KNAUF SHAFT WALL SINGLE LAYER

SHAFTWALL

 

THE KNAUF SHAFT WALL SYSTEM IS DESIGNED FOR USE WITHIN ELEVATOR SHAFTS AND

STAIRWELL AREAS THAT PROVE TO BE A VITAL LIFE SAFETY LINK IN MULTI-STORY BUILDINGS.

THESE WALLS ACT AS THE MAIN FIRE PROTECTION BARRIER AGAINST FIRE, THEY HELP TO

PREVENT FIRE ENTERING THE LIFT SHAFT AND SPREADING RAPIDLY FROM FLOOR TO FLOOR.

SHAFT WALL SYSTEMS PROVIDE ONE OR TWO HOUR FIRE RESISTANCE RATINGS IN

NON-LOAD BEARING CONFIGURATIONS.THE SYSTEM IS DESIGNED TO WITHSTAND THE

CONTINUOUS SURGE OF AIR PRESSURE CAUSED BY FAST MOVING ELEVATORS. THESE

SYSTEMS ARE CONSTRUCTED USING THE KNAUF CT AND J-TRACK CHANNELS THAT

SUPPORT THE 1” (25.4MM) TYPE X CORE BOARD AND BOTH THE ½” (12.7MM) AND

5/8” (15.9MM) TYPE X GYPSUM BOARDS.

 

ELIMINATE THE NEED TO BUILD EXTENSIVE SCAFFOLDING

THE 610 MM WIDE TYPE X CORE BOARD MAKES INSTALLATION FAST & EASY AS IT

FRICTION FITS WITHIN THE CT STUD AND AUTOMATICALLY PROVIDES A 24” (610 MM)

O.C SPACING READY FOR THE CLADDING OF THE TYPE X GYPSUM BOARD ON THE OUTER

FACE. SHAFT WALLS CAN BE ERECTED FROM ONE SIDE, ELIMINATING THE NEED TO BUILD

EXTENSIVE SCAFFOLDING.

 

SHAFTWALL PARTITIONS

KNAUF SHAFTWALL IS PERFECT FOR ALL SITUATIONS WHERE ACCESS ONE SIDE IS RESTRICTED,GIVING A HIGH FIRE PERFORMANCE WHILST BEING SAMPLE TO CONSTRUCT

 

SHAFTWALL SYSTEM BUILT-UP

 

KNAUF DRYWALL SYSTEMS CAN PROVIDE DEFLECTION UP TO 1/2 INCH (12 MM) USING THE STANDARD DETAIL AND STANDARD FLANGE UW TRACK (1 INCH / 25 MM)

HIGHER DEFLECTION REQUIREMENT CAN BE ACHIEVED USING THE TESTED HEAD OF WALL (MINIMUM STUD SIZE 2 1/2 INCH – 64 MM)

FIRE RATING UP TO 2 HOURS (USING GW-TX TYPE X BOARDS 15.9MM) DEEP FLANGE UW TRACK 2-3/8 INCH (60 MM)

STEEL ANGLE : 25 GA (0.5 MM) GALVANIZED STEEL WITH ONE LEG MEASURING 1 IN. (25 MM) AND THE OTHER ANGLE 3/8 IN. (10 MM) LONGER THAN THE MAXIMUM HEAD OF WALL JOINT OPENING.

 

Board Type Cladding Thickness Studs Size Total Thickness Max Height Approx. Weight Sound Insulation Min.Insu Thickness (min. 16 kg/m3) Fire Rating ASTM
Studs ASTM C645-00 Nonstructural Steel Framing Members, 20 Gauge (0.9 mm thick), ( 33 mm), spacing 24 in. (610 mm)
GW-TX 1 x 5/8” CT 2 1/2” 3 1/8” 4.00 m 45 kg / m2 40 STC 50 mm 1 hour
(Type X (1 x 15.9 mm) (CT 64 mm) (80 mm)
GW-TX 1 x 5/8” CT 4 1/32” 4 5/8” 5.30 m 45 kg / m2 44 STC 70 mm 1 hour
(Type X) (1 x 15.9 mm) (CT 102 mm) (118 mm)
GW-TX 1 x 5/8” CT 5 63/64” 6 5/8” 7.10 m 45 kg / m2 43 STC 100 mm 1 hour
(Type X) (1 x 15.9 mm) (CT 152 mm) (168 mm)
Related products