Menu
Categories
GYPROC REGULAR PLASTERBOARD
Call for price
Description
Gyproc Regular consists of an aerated gypsum core, firmly bonded to
strong paper liners, suitable for drylining internal surfaces. Configuration 1
Complies to ASTM & EN standards Configuration 2
Complies to EN standard only
Field of Application
It is suitable for use in Gyproc® partition, lining and ceiling systems where normal fire, structural, and acoustic levels are specified.
GYPROC RIGITONE MIX 600ML
Call for price
Description
Rigitone Mix is a ready filler for Rigitone perforated plasterboard joints. It forms part of the Rigitone Ready Mix Set and is used in the Joint Filling Technique.
Field of Application
Rigitone Mix 600ml is applied using Rigitone Pistol and the Rigitone nozzle. Once joints are generously and completely filled and screw heads covered (using Rigitone screw head template), a minimum of 24 hours drying time needs to be respected before sanding.
GYPROC RIGITONE PERFORATED ACOUSTIC GYPSUM BOARD
Call for price
Description
Rigitone is a modern acoustic system offering optimum solutions for acoustic ceilings and walls which perform two key functions. On the one hand, the broad spectrum of acoustic boards offers virtually unlimited design scope for creating highly attractive rooms and buildings.
Field of Application
Ceilings
GYPROC SEALANT
Call for price
Description
Gyproc Sealant is a ready-to-use, water based, low VOC sealant. It is easy to apply and efficiently seals internal and external joints between construction parts subject to stress. Gyproc Sealant is used for sealing air paths to reduce air-leakage and optimize sound insulation performance. It cures at room temperature at ambient humidity conditions and requires no surface pre-treatment or primer in most surfaces
Field of Application
Suitable for sealing joints; between walls and ceilings, in blockwork (where only low movement is expected), around door and window frames, ventilation grills and for sealing duct holes. Can be applied to porous substrates such as plasterboard, metal, concrete, plastics, cement, blockwork and wood
GYPROC SHADOW ANGLE
Call for price
Description
Gyproc Shadow Angle is a primed, pre-formed aluminium trim for design effects on Gyproc MF ceilings.
Field of Application
It enables to create a shadow gap of 15mm along the ceiling perimeter.
Gyproc Soffit Cleat with Nut & Bolt
Call for price
DESCRIPTION
These channels and associated accessories are
designed for providing seamless suspended ceilings
that can be either flat or curved. Also available in increased gauge upto 0.9mm with increments of
0.1mm, MF7 and GA1 also available in 1.5mm gauge thickness
* Bespoke lengths available on request
Application
Ceiling Systems
GYPROC SOUNDBLOC PLASTERBOARD
Call for price
Gypsum plasterboard with a higher density core specifically
designed to achieve greater levels of sound insulation. Gyproc
SoundBloc™ consists of an aerated gypsum core encased in, and
firmly bonded to, strong paper liners. Gyproc SoundBloc™ is a
plasterboard that is suitable for drylining internal surfaces.
Application
- Gyproc SoundBloc™ is designed for use in Gyproc® partition, lining and ceiling systems where greater levels of sound insulation are required.
- EN 520:2004+A1:2009 - Type D
- ASTM C1396-17 Standard Specification for Gypsum Board - Section 5 & 12
GYPROC TECH SCREW
Call for price
Description
Self-drilling and specially designed for increased gauge Gypframe X components up to 3mm
Field Of Application
Used for assembling Gypframe X metal components where minimal disruption to the gypsum board lining is desirable.
GYPROC TIE WIRE ANCHOR
Call for price
Description
Gyproc Tie Wire Anchor is zinc coated and corrosion resistant. It uses a reliable wedge anchor fixing with a closed eyebolt design to suspend Gypframe T Grid and Eco T Grid ceiling systems from concrete soffits
Field Of Application
Gyproc Tie Wire Anchors are designed for either cracked or uncracked concrete soffits. The wedge anchor design may also be used on other solid masonry backgrounds
GYPROC WAFERHEAD JACKPOINT SCREW
Call for price
Description
Gyproc Waferhead Drywall Screws are used for assembling Gypframe metal components
Field Of Application
Self-drilling screws specially designed for Gypframe components with gauges from 0.8mm to 2.3mm and all Gypframe ‘I’ studs.
GYPROC WAFERHEAD SCREW
Call for price
Description
Gyproc Waferhead Drywall Screws are used for assembling Gypframe metal components
Field Of Application
Designed for Gypframe metal components with a gauge upto 0.79mm
GYPROC WEDGE ANCHOR
Call for price
Description
Gyproc Wedge Anchor is a zinc coated corrosion resistant anchor used for fixing into masonry. It is suitable for fixing Gyproc MF ceiling hangers and for fixing head/floor channels and abutments of Gyproc Drywall Partition Systems.
Field of Application
Gyproc Wedge Anchor is suitable for use on the following base materials:
• Cracked and uncracked concrete
• Natural stone
• Solid block