Description
weberjoint and weberjoint thick are cement-based pre-mixed compressible non-shrink grouts, used for filling tile joints in wet and dry areas. They are water resistant, easy to apply, and can be cleaned easily. They are thixotropic, crack-free, non-slump grouts that only need to be mixed with water. Available in a wide range of attractive colors (please consult our color chart board). SCOPE OF USE weberjoint / weberjoint thick are suitable for walls and floors for internal and external applications.
• Wet areas (like bathrooms and kitchens)
• Stairs
• Rooms
weberjoint / weberjoint thick are available for two types of tile joints:
• weberjoint: joints from 1.5 to 4 mm wide.
• weberjoint thick: joints from 4 to 10 mm wide. Expansion joints in walls and floors should be filled with an appropriate sealant like weberjoint seal PU or weberseal PS 1000 PG/GG.
download data sheet
Description
weber joint perfect is a high performance cement-based pre-mixed non-shrink grout, used for filling tile joints in wet and dry areas.
Specific attributes:
- Highly stain resistant (even coffee, wine, ketchup, etc…)
- Anti-fungus with MOULD STOP Technology
- Highly water resistant with HYDRO REPELL technology
- Anti-cracks (joints between 1.5 and 20 mm width)
- High abrasion resistance
weberjoint perfect is labeled with the "EC1 Plus" classification code. The classification guarantees a low emission of Volatile Organic Compounds (VOCs) and the absence of emission of carcinogenic substances. weber joint perfect is easy to apply and can be cleaned easily. It only needs to be mixed with water. weber joint perfect is available in a wide range of attractive colors (please consult our color chart board).
download datasheet
Description
Webercol fix is a ready-mix cement-based tile adhesive for internal use. Webercol fix is polymer modified and water resistant with a strong bonding effect
Scope
webercol fix can fix a wide range of ceramic tiles.
webercol fix can be used to tile directly onto the following substrates:
• Concrete
• Stone walls (cleaned and prepared)
• Cementitious plaster and renders Gypsum substrates are not advisable.
webercol fix can be used for tiling in:
• Bathrooms
• Regular rooms
• Kitchens
• Stairs
Download Datasheet
Description
webercol flex is a two-component cement-based polymer modified, flexible, waterproof tile adhesive for internal & external use. It is a ready mix powder containing cement, siliceous sand and additives. webercol flex has outstanding qualities such as high bonding strength, high resistance to water and chemicals, water tightness and flexibility. It is used internally and externally with a wide range of small to large tiles, and in cases of permanent exposure to high degrees of humidity.
download datasheet
Description
webercol plus is a ready mix cement-based high performance polymer “latex” modified tile adhesive for internal and external use. webercol plus has a strong bonding effect, used for adhering large tiles, or in cases of permanent exposure to high degrees of humidity. It can be used in a damp environment, and is water resistant. webercol plus is non-sagging and classified "T" (slip resistant) according to EN 12004 for tile adhesives. The addition of the new Low Dust feature allows a dust reduction by 90% during pouring and mixing of the product.
The Low Dust effect will lead to:
• Cleaner working sites
• Easier and quicker renovation
download datasheet
DescriptionPRODUCT
webercol premium is a high performance cement-based polymer modified adhesive for internal and external use. It can be used in a damp environment and is water resistant. webercol premium exceeds standard requirements EN12004 and is classified as C2TES1. werbercol Premium is non-sagging and slip resistant "T" with ability to perform in extended open time conditions "E". webercol premium is “S1” deformable according to standard EN 12002.
BENEFITS
• Flexible
• Slip resistant
• Extended open time
• Suitable for low porosity tiles
• For indoor & outdoor floors/walls tiling
• Resistant to temperatures between -20C to +70C
• Vertical application due to its slip resistance property
• Bonding strengths exceeding the standard's requirements
download datasheet
Description
webercol Pro is a ready mix cement-based tile adhesive modified with redispersible polymer for internal walls and floors as well as external floors. It is a latex-Portland cement mortar as per ANSI A118.4. webercol Pro has a strong bonding effect and achieves C2TE requirements under EN12004 at standard condition. webercol Pro is non-sagging and classified as slip resistance "T" with ability to perform in extended open time conditions "E". webercol Pro is *S1 deformable according to standard EN 12004 when mixed with *weberad 225 MB.
Download Datasheet
Description
weberdry 110 FX is a two component polymer modified cementitious coating:
• Powder made of cements, fillers and admixtures.
• Liquid based on resins and additives.
It is available in Grey and White
weberdry 110 FX cures to form an elastomeric, waterproof, flexible and resistant membrane, suitable for use in potable water tanks, reservoirs, canals and tunnels. The material which can be applied on cement based substrate like concrete, cement plaster, masonry and cementboards (with primer) substrates has been designed to accommodate good crack bridging qualities even after long term water immersion. weberdry 110 FX must be used on damp cement based substrates. The adhesion and sealing qualities of weberdry 110 FX are outstanding. Therefore, it can be used for positive or negative hydrostatic pressures. The material prevents reinforcements from corrosion.
download datasheet
Description
weber dry 116 FX Grey/White is a cement based two component polymer modified waterproofing slurry, available in grey (formely Waterproof 116FX) and white (formely Waterproof.126 FX).
It is applied to concrete and mortar structures to prevent water infiltration. weber dry 116 FX must be used on damp cement based substrate and this waterproof membrane can be used under interior and exterior ceramic tiles.
ADVANTAGES
• Waterproof, flexible, crack bridging
• Approved for use in contact with potable water
• Outstanding adhesion to concrete and masonry
download datasheet
Description
Weber dry 136 FX is a two-component cement polymer modified elastomeric waterproofing coating used as a waterproof lining over masonry and concrete. weber dry 136 FX is composed of a cement mortar with additives, and of a liquid component.
Mixed together on site, the product is easy to apply and is used as an effective protection coating on walls against:
1. water-borne salts (chlorides, sulfates), wear, weather and chemicals, atmospheric gases and carbonation, from rusting of steel reinforcements. It is a non shrink , non-flammable mortar.
2. weber dry 136 FX is available in white and grey colors. For other colors, contact Company's Technical Department.
Download datasheet
Description
weder dry bitumen is a thixotropic bitumen emulsion designed for applications as a primer and sealer coat. The coating is dark brown in color and dries to black flexible protective film. The finished films are tough and forms a barrier to water and vapor transmission.
ADVANTAGES
• Cold applied, easy to apply
• Cold drying
• Excellent adhesion to concrete, metal and wood
• Can be applied over damp surfaces
• Non-flammable
download datasheet
DescriptionPRODUCT
webdry epo PW is a two-part, solvent free, non-toxic, epoxy resin based coating with outstanding mechanical properties. It is specially formulated to have excellent chemical and high abrasion resistance, as well as superb waterproofing features for concrete and metals surfaces.
SCOPE OF USE
webdry epo PW is ideal to be used for:
• Lining of potable water and food process structures, like storage areas and piping.
• Lining of chemicals storage tanks of petroleum and petrochemicals products. Also it is used as a protective coating for water reservoirs, tanks, pipes, marine structures, oilfields,
refineries, tunnels, etc.