Description Knauf “ PVC Corner Bead with Mesh” is a PVC profile with 22mm perforated wings for the perfect finishing of edges formed byAquapanel boards. The fibermesh on the wings, it provides superior keying with the finishing coat and avoid cracking. Field Of  Application For quicker and easier reinforcement of Aquapanel boards and ETICS/EIFS systems corners with 3 mm thickness of finishing.

Description Knauf FR (Fire Rated) Putty Pads are an easy-to-apply fire and sound rated sealant supplied as a non-setting putty. The pad is hand workable, re-useable and re-serviceable due to its non-setting properties. Field Of  Application Internal Fixing:Insert the pad into the socket back box so that the pad completely covers the back and sides. Make a slit to allow the wires to pass through the pad. Rear Fixing:Place the pad over the socket back box so that the pad completely covers the back and overlaps onto the dry lining partition.

Description KNAUF “movement bead pvc with mesh” is a PVC profile with 25mm perforated wings(with certicated fibermesh“ETAG004” 100+100mm) for the perfect finishing of gaps between Aquapanel boards or for any ETICS/EIFS system. Thanks to the fibermesh on the wings, it provides superior keying with the finishing coat and avoid cracking thanks to the 80mm flexible membrane in between. Field Of  Application For quicker and easier finishing of gaps between Aquapanel boards and for ETICS/EIFS systems. Plaster thickness 3 mm for finishing (rendering or silicon based plaster) Placing Simply glue the KNAUF “movement bead pvc with mesh” on the edges formed by the Aquapanel boards or by the insulation of the ETICS/EIFS system.

Description Made of 0.5mm steel the Knauf resilient channel is a very effective, low-cost methods of improving sound transmission loss through Knauf drywall partitions. It is used as a cross-furring member fixed to the Knauf CW studs ready for the resilient attachment of gypsum boards; the knurled face makes the gypsum board application easier. Knauf resilient channel should be installed perpendicular to the steel framing with the attachment flange of the resilient channel installed along the bottom edge. Field Of  Application Knauf Resilient channels are to be installed perpendicular to the steel framing CW studs. The resilient channel is to be positioned with the mounting flange directly over the steel framing CW stud, and attached using the Knauf LN screws directly through the mounting flange. Resilient channels should be installed with the mounting flange of the resilient channel down, except at the floor or starter row where the mounting flange may be installed with the flange up to accommodate fixing to the steel framing CW studs.